RC plane QAV 250 Carbon Fiber $70

Item No.: 6543

Product Description

drone with camera RC plane QAV 250  Carbon Fiber Mini Quadcopter Frame F3 Flight Controller emax RS2205 2300KV Motor


The 250mm Carbon Fiber FPV Quadcopter airframe is smallest FPV quad kit to date.


-Full 3K Carbon Fiber Frame
-Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).
-"Bumpers" on the end of the arms to protect the motor during a crash, just like the QAV250.
-Easy Lipo Access (suggested Lipo is a 1000mah 3s)
-Support for 32mm board cams as well as 26mm cams in cases. (not included )
-Support to carry HD camera (such as the GoPro 4, Mobius, or GoPro Session) with optional camera vibration mount (not included)
-Weight: 92.5g 
Sp Pro Racing F3 Flight Controller Board Cleaflight 6dof 10dof Deluxe  features:
-36x36mm board with 30.5mm mounting holes 
-Weight ~6 grams 
-STM32F303 CPU, 72Mhz inc FPU 
-High-Capacity Flash (Acro and Deluxe) 
-MPU6050 accelerometer/gyro 
-MS5611 barometer (Deluxe only) 
-HMC5883 compass (Deluxe only) -MicroUSB socket -2x 8pin JST-SH sockets (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND) 
-8x 3pin though-holes for pin headers for ESC/Servo connections 
-2x 4pin though-holes for pin headers for 2x serial ports 
-1x 2pin though-holes for pin headers for battery voltage 
-1x 2pin though-holes for pin headers for buzzer 
-1x 4pin JST-SH socket for I2C 
-1x 4pin JST-SH socket for SWD debugging 
Emax RS2205 2300KV Motor Specifications:
- Framework:12N14P
- No. of Cells 3 - 4S
- Length:31.7mm
- Shaft: M5
- KV: 2300
- Max Thrust: 1024g
- Diameter:27.9mm
- Propeller Suggested: HQ 5045 BN
- Weight: 30g

Favourite FVT LittleBee 20A-PRO OPTO ESC Specifications:

-Input: 2-4s Lipo 

-Constant: 20 Amps 

-Burst: 30 Amps(10 seconds) 

-Weight: 7g w/wires 

-Dimensions: 24.5 x 12.5 x 3mm 

-Motor wire: 50mm 20g 

-Signal wire: 100mm 22g 

-MCU: Silabs F396 @ 48Mhz 

-PCB - 4 Layer Blind Pole PCB - 3oz Pour 

-Mosfet: N-Channel 

-BEC: None


1000TVL camera decribtions:

Sensor: 1/4 "Farbe CMOS-
Videoformat: NTSC 
Effektive Pixel:NTSC: 720x487
Bildgröße: 1/4: 4.077x3.136mm
Objektiv: 2.8mm
Scanfrequenz: NTSC: H: 15.7343KHz V: 60Hz
Horizontale Auflösung: 1000 TV-Linien
Elektronischer Blendenverschluß: NTSC: 1 / 60-1 / 100000 (en)
Minimale Beleuchtung: 0.1LUX / F1.2
Graustufen: 10 Klasse
Gama: 0.45
Videoausgang: 1,0 Vss 75ohm
Input: DC 12V ± 10%
Arbeitsbereich: -20 ~ 50 Celsiusgrad, RH95% maximal. Arbeitsstrom: 30mA

 TS5828L 5.8G 600mW 40 Channel Mini Wireless AV Transmitter Features:

Module Size: Approx. 3.8x1.9cm/ 1.50x0.75"
Modulate: Wideband FM Modulate
Video Format: NTSC/PAL
Output Impedance: 50 Ohm
Output Power: 27~28dBm
Channel: 40CH
Operating Voltage: 7V~24V
Supply Current: 280mA
Video Band Width: 0~8.0 MHz
Audio Carrier Frequency: 6.5MHz
Video Input Level: 0.8~1.2 Vp-p
Video Input Impedance: 75 Ohm
Audio Input Level: 0.5~2.0 Vp-p
Audio Input Impedance: 10K Ohm
Connector: RP-SMA
40 Channels: Cover A, B, E bands and F bands
Transmitter Frequency: 5645-5945MHz with 600mW power output
Transmitting Distance: >1500m (open area)


  Package Includes:(as the main picture)

- 1pcs 250mm 4-Axis Carbon Fiber Quadcopter Frame Kit (not assembeled, just a frame kit)

- 1pcs F3 6DOF/10DOF deluxe Flight Control Board(send as you choose)
- 4pcs Littlebee20A Pro
- 4 pcs emax RS2205 (2CCW, 2 CW)
- 1pcs Mateck V3 power distribution board
-1 PCS 1000TVL Camera
- 4pcs Green motor cover(Green/Black/Red,send at random)
- 4pcs LED
-1set  TS5828L
Note: Please be well noted that this product is not assembled.The color of motor cover are sent at random.If you have any special demand,please leave a message below the order.